Vehicles before change point in 1982
REMOVING AND INSTALLING TENSION STRUT
Remove and install front wheel 36 10 300.
Detach stabilizer at control arm.


Siehe auch 36 10 300
63031026 - click to zoom
 
Installation: Keep to specified torque¹) for
control arm and distance (A) on pad for stabilizer.
Distance A = 60 mm (2.362´´) only for singlepiece
rubber pad (also refer to 31 35 000).


Siehe auch ¹) See Specifications
Siehe auch 31 35 000
63031083 - click to zoom
 
Unscrew nut on control arm.
Installation: Tighten to specified torque¹).
Replace self-locking nuts.
Install washers with convex side facing rubber
mount.


Siehe auch ¹) See Specifications
63031027 - click to zoom
 
Unscrew nut on tension strut.
Installation: Tightening torque¹).
Replace self-locking nuts.
Install washers with convex side facing nuts.


Siehe auch ¹) See Specifications
63031033 - click to zoom
 
Detach control arm at front axle carrier and
remove tension strut.
Installation: Tightening torque¹).
Replace self-locking nuts.


Siehe auch ¹) See Specifications
63031028 - click to zoom