 |
|
Unscrew plug and drain coolant. Remove radiator - see 17 11 000. Installation: Pour in coolant***.  17 11 000 *** See Service Information of Gr. 00
|  |
Unscrew power steering pump - hoses remain connected. Installation: Tighten drive belt and check tightness with Special Tool 11 5 021. |  |
Cars with Air Conditioner: Unscrew compressor - refrigerant hoses remain connected. Installation: Tighten drive belt and check tightness with Special Tool 11 5 021. |  |
 |
|
Pull off plug (1) and lift out leads. Loosen hose clamp (2). Unscrew nut (3) and remove air cleaner with air flow sensor. |  |
Pull off hose. |  |
Pull off hoses (4 and 5). Disconnect cable (6). Lift out hose (7). Unscrew manifold. Installation: Check O-rings, replacing if necessary. |  |
Pull off plug on control unit in glove box and guide leads into the engine compartment. Pull off lead (4) and disconnect the ignition coil. Disconnect the wire harness. |  |
Disconnect fuel hose (5). Pull off Vacuum hose (6). |  |
Disconnect plugs for reference mark and speed senders. Installation: Connect the gray plug with the plug, which is marked with a ring. |  |
Disconnect hoses on expansion tank. |  |
Pull off ring (7). Lift out diagnosis socket (8). Disconnect leads. |  |
Disconnect heater hoses. |  |
Unscrew fuel pipe. Unscrew oil pipes. Counterhold while loosening and tightening. Installation: Tightening torque*. * See Specifications
|  |
Disconnect positive lead on starter and loosen the lead straps. |  |
Attach Special Tool 11 0 020 on engine. |  |
Unscrew ground lead. Unscrew engine mounts: Left - loosen at bottom unscrew at top Right - unscrew at bottom loosen at top Installation: Tightening torque*. * See Specifications
|  |
 |
