REMOVING AND INSTALLING FRONT DOOR LOCK
Detach and attach door trim - 51 41 000.
Pull off Acella plastic sheet as far as required.
Detach lock´s remote controls.


Siehe auch 51 41 000
63051045 - click to zoom
 
Detach connecting rod from door lock and
central lock switch.

63051159 - click to zoom
 
Unscrew screw.

63051160 - click to zoom
 
Unscrew socket head cap screws.
Remove clip plate and guide plate.

63051048 - click to zoom
 
Installation: Insert bushing into guide pad.

63051049 - click to zoom
 
Detach remote control connecting rod at
door lock and remove door lock.

63051050 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
FRONT DOOR LOCK
Remove door trim panel 51 41 000.
Pull off plastic sheet as required.
Unscrew and disconnect lock remote control.
Installation:
Preload lock remote control slightly.


Siehe auch 51 41 000
63051265 - click to zoom
 
Disconnect connecting rod on door lock.

63051269 - click to zoom
 
If applicable, lift off clamps.
Disconnect connecting rod on door lock.

73051666 - click to zoom
 
Unscrew central lock drive motor and disconnect
connecting rod.

63051266 - click to zoom
 
Unscrew screw.

63051160 - click to zoom
 
Unscrew screws.
Take off clamping plate and guide pad.

63051048 - click to zoom
 
Disconnect remote control connecting rod in
clip and remove lock.
Installation:
Make sure that connecting rod is guided in
between the window regulator and door inside
panel.

63051267 - click to zoom
 
Installation:
Bracket of door lock control presses on tongue
of door lock.

63051268 - click to zoom