REMOVING AND INSTALLING DOOR
TRIM PANEL (FRONT)
Remove and install front door armrest 51 41 060.
Lift cover off of door inside handle.
Unscrew screw and remove door inside handle
with escutcheon.
Installation: Door inside handle must be approximately
horizontal.


Siehe auch 51 41 060
63051099 - click to zoom
 
If applicable, lift cover off of window winder.
Loosen screw and remove window winder with
escutcheon.
Installation: Window winder faces forward
when window is shut.

63051100 - click to zoom
 
Remove door trim panel.
Installation: Replace damaged clamps or sockets.
Large diameter end of coil springs faces trim.

63051101 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
FRONT DOOR TRIM PANEL
Pull off outside mirror control knob.
Lift out mirror switch with Special Tool
61 1 300.
Pull off plug.

63065523 - click to zoom
 
Unscrew screws.

63051365 - click to zoom
 
Unhook grip in armrest.

63051293 - click to zoom
 
Unscrew screws.
Take off cover.

63051294 - click to zoom
 
Pull back cover for door opener.

63051298 - click to zoom
 
Lift off trim panel beginning at the rear.
Installation:
Replace damaged clips.

63051296 - click to zoom
 
Lift off trim panel.
Installation:
Replace damaged clips.

63051299 - click to zoom
 
Important!
A retainer holds the trim panel at the front.
Swing trim panel toward the center of the
car and disconnect.

63051297 - click to zoom