Vehicles before change point in 1982
REMOVING AND INSTALLING BRAKE
PRESSURE REGULATOR
Draw brake fluid out of tank.
Detach lines (1 and 2).
Installation: Tighten to specified torque¹).
Bleed brakes - 34 00 046.


Siehe auch ¹) See Specifications
Siehe auch 34 00 046
63034095 - click to zoom
 
Unscrew bolt and remove brake pressure
regulator.

63034096 - click to zoom
 
When replacing brake pressure regulator, note
code¹) and piston diameter¹).
20 = Code
6 = Piston diameter 16 mm (0.630´´)
New Version:
Code 20/3
Green color code


Siehe auch ¹) See Specifications
63034106 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
BRAKE FORCE REGULATOR
(Not on M 6)
Draw off brake fluid through brake fluid tank.
Disconnect lines (1 and 2).
Installation:
Tightening torque*.
Bleed brakes 34 00 046.
Unscrew bolt and remove brake force regulator
with branch.


Siehe auch * See Specifications
Siehe auch 34 00 046
63034160 - click to zoom
 
Check reduction value and switching pressure
when replacing brake force regulator.
3 = Reduction value 0.30
40 = Switching pressure

63034161 - click to zoom