Vehicles before change point in 1982
REMOVING AND INSTALLING PARKING BRAKE LEVER
Take off rubber cap.
Detach parking brake cable.
Remove lock washer and press out pin.
New Version:
Unscrew nut and press out bolt.
Installation: Adjust parking brake 34 10 014.
Tightening torque¹).


Siehe auch 34 10 014
Siehe auch ¹) See Specifications
63034123 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
PARKING BRAKE LEVER
Take off brush plate.
Remove center console.
Unscrew adjusting nuts of parking brake cables.

63034168 - click to zoom
 
Unscrew stop nut and press out bolt.
Important!
Do not press locking button when pulling
parking brake lever out of holder.
Installation:
Slide in locking element at opening.

63034165 - click to zoom
 
Be careful not to damage warning switch when
removing and installing.
Check adjustment.
Installation:
Adjust parking brake 34 10 014.
Replace stop nut.


Siehe auch 34 10 014
63034173 - click to zoom