Vehicles before change point in 1982
REMOVING AND INSTALLING SPRING STRUT MOUNT
Remove and install spring strut 31 31 000.
Clamp spring strut in a vise with Special Tool
31 3 000.
Compress coil spring with Special Tool
31 1 111.


Siehe auch 31 31 000
73031081 - click to zoom
 
Take off end cap.
Unscrew self-locking nut (1), holding piston
rod (2).
Installation: Tightening torque¹).
Replace self-locking nuts.


Siehe auch ¹) See Specifications
32331025 - click to zoom
 
Screw in Special Tool 31 3 113.
Release coil spring.
Important: Screw in special tool whole length
of threads.

73031082 - click to zoom
 
Installed Order:
1 = Washer with large diameter
2 = Insulator
3 = Mount
4 = Washer with small diameter
5 = Self-locking out
Concave side of insulator (2) faces mount.

63031059 - click to zoom