Vehicles after change point in 1982
REMOVING AND INSTALLING
SELECTOR LEVER
- Version with Cable -
Remove selector lever complete with base - see 25 16 050.
Drive out pin.


Siehe auch 25 16 050
2025041 - click to zoom
 
Push out pin.
Take off washer (1).
Pull bearing sleeves (2) out of housing.
Installation:
Replace bearing sleeves.

2025042 - click to zoom
 
Pull off plug (3).
Unscrew screws (4).
Remove transmission switch together with the upper selector lever section.

2025043 - click to zoom
 
Tilt out the selector lever together with the transmission switch and shift gate.
Installation:
Fork of transmission switch engages above the selector lever.

2025044 - click to zoom
 
Unscrew shift gate on transmission switch.
Installation:
Make sure that pins on the transmission switch engage in bores of the shift gate.

2025045 - click to zoom
 
Unscrew screw on handle.
Pull off handle.
Installation:
Check position of handle to selector lever.

2025046 - click to zoom
 
Installation:
Guide pin of push button into pull rod hole.

2025028 - click to zoom
 
Take pull rod out of the upper selector lever section.

2025029 - click to zoom