Vehicles after change point in 1982
REMOVING AND INSTALLING
SELECTOR LEVER COMPLETE
WITH BASE
- Version with Cable -
Remove center console 51 16 200.
Lift out retainer.
Unscrew eye on pin.
Important!
Do not bend the steel wire.


Siehe auch 51 16 200
2025036 - click to zoom
 
Unscrew nut.
Disengage cable sleeve in holder.

2025037 - click to zoom
 
Disconnect plugs.

2025038 - click to zoom
 
Unscrew bolts.
Remove base.

2025039 - click to zoom
 
Installation:
Insert insulator.

2025040 - click to zoom
 
Installation:
Adjust cable.
Selector lever in "P" (most forward position).
Transmission lever in "P" (most forward position).
Press cable rod opposite the forward direction.
Clamp cable rod without tension.
Important!
Tightening torque = 10 to 12 Nm (7 to 9 ft. lbs).
Don't bend the cable.

2025053 - click to zoom