Vehicles before change point in 1982
INSTALLING RECONDITIONED TRANSMISSION
Remove transmission 24 00 020.
Important: Always clean oil cooler and lines
with compressed air and flush twice with ATF
before installing a reconditioned transmission.
Note transmission code¹) on data plate.
Remove transport holder (1).


Siehe auch ¹) See Specifications
63024030 - click to zoom
 
Important: Check diameter of torque converter
shaft (A), before installing of exchange transmission.

73024048 - click to zoom
 
Torque converter shaft diameter 21 mm
(0.8´´) adapter sleeve (1) ist installed.
Torque converter shaft diameter 32 mm
(1, ´´) i.a. remove adapter sleeve (1).

73024049 - click to zoom
 
Transfer linkage (2).
Installation: Secure spring clip from top to
bottom.
Transfer oil line connections.

63024031 - click to zoom
 
Transfer cross member (3) and exhaust carrier (4).

63024032 - click to zoom
 
Vehicles after change point in 1982
INSTALLING EXCHANGE
TRANSMISSION
Remove transmission 24 00 020.
Important!
Always clean oil cooler and lines with
compressed air and flush twice with ATF before
installing an exchange transmission.
Transmission code* on data plate.
Take off transport holder (1).


Siehe auch 24 00 020
Siehe auch * See Specifications
2824025 - click to zoom
 
Transfer linkage (2).
Important!
Linkage (2) must be attached in bore of
selector lever without a code letter.
Moount spring clamps from top to bottom.

63024031 - click to zoom
 
Transfer cross member (3) and exhaust
carrier (4).

2824026 - click to zoom