Vehicles after change point in 1982
REPLACING RADIAL OIL SEAL FOR OUTPUT FLANGE
Remove propeller shaft - see 23 00 022.
Lift out lockplate.
Apply Special Tool 23 1 200.
Holt output flange with Special Tool
23 0 020 and unscrew collar nut with
Special Tool 23 1 210.


Siehe auch 23 00 022
63523021 - click to zoom
 
If too difficult, pull off output flange with
Special Tool 33 1 150.

63523022 - click to zoom
 
Lift out radial oil seal.
Drive in radial oil seal (1) with Special Tool
23 1 380 used together with Special Tool
00 5 500.
Installation:
Lubricate sealing lip with oil.
Mount output flange.
Install collar nut with a bolt cement**.
Tightening torque*.
Install lockplate.


Siehe auch ** Source: HWB
Siehe auch * See Specifications
63523023 - click to zoom