Vehicles before change point in 1982
REMOVING AND INSTALLING REAR BRAKE DISC
Remove and install rear wheel - 36 10 300.
Detach caliper.
Take brake line out of clamp.
Important: Brake line remains connected.
Unscrew bolt and remove brake disc.
Installation: Tighten to specified torque¹).
Important: If one brake disc has to be replaced,
always replace both brake discs of one axle.
Adjust parking brake - 34 10 014.


Siehe auch 36 10 300
Siehe auch ¹) See Specifications
Siehe auch 34 10 014
63034121 - click to zoom
 
Important: Inboard vented brake discs are
balanced.
Never remove or move balance clips.
Breaking in Caliper Brakes When Replacing
Brake Discs:
Car must be broken in in 3 phases.
Phase 1: 5 full stops from 50 km/h (30 mph)
at maximum retardation.
Phase 2: Let brakes cool off.
Phase 3: 5 more stops from 50 km/h (30 mph).

63034037 - click to zoom