Vehicles before change point in 1982
REPLACING BELLOWS
Important: Use repair kit.
Remove and install output shaft - 33 21 000.
Take off sealing cover (1).
Remove circlip (2).
Open clip on bellows.
Press out output shaft from joint (3).
Peel off bellows (4).


Siehe auch 33 21 000
73033059 - click to zoom
 
Install bellows on output shaft.
Clean spline of joint and output shaft to
remove grease.
Coat spline with Loctite (included in repair
Kit) and press on joint.
Install circlip.

73033044 - click to zoom
 
Pack joint and bellows with grease¹).
Clean sealing surfaces for bellows to remove
grease.
Coat bellows with an adhesive¹) and secure
with new clips.
Seal sealing cover with Curil and install.


Siehe auch ¹) See Specifications
73033082 - click to zoom