Vehicles before change point in 1982
REMOVING AND INSTALLING STEERING LOCK
Disconnect ground wire at battery.
Remove and install steering wheel 32 33 000.
Remove and install casing lower section
32 31 020.
Detach turn signal and wipe/wash switch at
switch plate.
Installation: See installation notes for replacing
turn signal cancelling cam 32 31 131.


Siehe auch 32 33 000
Siehe auch 32 31 020
Siehe auch * See Specifications
63032084 - click to zoom
 
Remove shear-off screws (1 ... 4) on switch
plate with a chisel or similar tool.

63032115 - click to zoom
 
Unscrew stud (5).
Pull out ignition switch.
Installation: Turn back ignition key all whe way.
Position ignition switch at off position and install.

63032116 - click to zoom
 
Remove shear-off screw (6) with a chisel or
similar tool.
Remove steering lock plate (7) and pull out
steering lock.

63032117 - click to zoom