Vehicles before change point in 1982
REPLACING STEERING SPINDLE BEARING
Disconnect ground wire at battery.
Remove and install steering 32 33 000.
Remove and install casing lower section
32 31 020.
Detach turn signal and wipe/wash switch at
switch plate.
Remove self-cancelling cam.
Installation: Replace self-cancelling cam, see
32 31 131.


Siehe auch 32 33 000
Siehe auch 32 31 020
Siehe auch * See Specifications
63032084 - click to zoom
 
Remove holder for steering spindle bearing.

63032085 - click to zoom
 
Remove collar (1).
Installation: Position collar (1) that snap ring
(2) is in recess of collar.

63032091 - click to zoom
 
Remove snap ring (2), washer (3), spring (4) and
ring (5).
Installation: Stem of ring (5) faces steering spindle
bearing.
Install snap ring (2) with Special Tool 32 3 050.

63032092 - click to zoom
 
Remove steering spindle bearing.
Installation: Press steering spindle bearing into
outer tube flush with Special Tool 00 5 500.

63032087 - click to zoom