Vehicles before change point in 1982
REPLACING CENTER TIE ROD
Remove cotter pin and unscrew castle nut.
Press left and right tie rods off of center tie rod
with Special Tool 32 2 050.
Installation: Tightening torque¹).
Check joint seal and replace if necessary.
Lock castle nut with cotter pin.
Check toe optically.


Siehe auch ¹) See Specifications
63032067 - click to zoom
 
Remove cotter pin and unscrew castle nut.
Press center tie rod off of steering drop arm with
Special Tool 32 2 070.
Installation: Tightening torque¹).
Lock castle nut with cotter pin.


Siehe auch ¹) See Specifications
63032069 - click to zoom
 
Turn front wheels to right lock.
Remove cotter pin and unscrew castle nut.
Press center tie rod off of steering guide arm with
Special Tool 32 2 070.
Installation: Tightening torque¹).
Lock castle nut with cotter pin.


Siehe auch ¹) See Specifications
63032070 - click to zoom
 
Installed length of center tie rod:
A = 488 ± 1 mm (19.212 ± 0.040´´).

63032071 - click to zoom
 
Vehicles after change point in 1982
REPLACING CENTER ROD
Remove cotter pin and unscrew castle nut.
Installation:
Lock nut with cotter pin.
Replace self-locking nut on new type.
Tightening torque*.
Check front wheel alignment with optical
tester - see 32 00 034.


Siehe auch 32 00 034
Siehe auch * See Specifications of Gr. 32
2832562 - click to zoom
 
Press off side tie rods with Special Tool
32 2 050 and center tie rod with Special Tool
32 2 040.

2832563 - click to zoom
 
Distance A = 500 ± 1 mm (19.685 ± 0.039´´).

2832041 - click to zoom