Vehicles after change point in 1982
REPLACING RUBBER MOUNT
IN LEFT OR RIGHT CONTROL
ARM
Unscrew control arm on bracket (3).
Installation:
4 = Washer (both sides)
Replace self-locking nut.
Tightening torque* for car loaded down to normal position*.


Siehe auch * See Specifications
2831038 - click to zoom
 
Suspend control arm from car on piece of wire (prevents damage on ball joint).
Pull out rubber mount with Special Tools 31 1 051/052 and 33 3 051/052/105/106.
Installation:
Rubber mount and control arm bore must be free of grease.
Pull in rubber mount from bevelled side of control arm.

2831046 - click to zoom
 
Control Arm Removed:
Press rubber mount out and in on a press with Special Tools 31 1 051/052.

2031016 - click to zoom