Vehicles after change point in 1982
REPLACING RUBBER MOUNT
IN LEFT OR RIGHT THRUST
STRUT
Unscrew bolt.
Installation:
1 = Washer (both sides)
Replace self-locking nut.
Tightening torque* for car loaded down to normal position*.
Important!
Always replace rubber mounts on both sides.


Siehe auch * See Specifications
2831040 - click to zoom
 
Pull out rubber mount with Special Tools 31 1 052/053 and 33 3 051/052/105/106.

2831047 - click to zoom
 
Installation:
Check identification of rubber mount.
N = rubber beads and green paint dot.

2831036 - click to zoom
 
Rubber mount and thrust strut bore must be free of grease.
Pull in rubber mount with special tools that arrow faces mark.
Protrusion (A) must be uniform.

2831028 - click to zoom