Vehicles after change point in 1982
REMOVING AND INSTALLING
LEFT OR RIGHT CONTROL
ARM
Remove front wheel - see 36 10 300.
Unscrew bolt (2).
Lift off tie rod arm on spring strut.
Installation:
Clean threads of bores and bolts.
Lock bolts with bolt cement**.
Tightening torque*.


Siehe auch 36 10 300
Siehe auch * See Specifications of Gr. 31/32
Siehe auch ** Source: HWB
2031013 - click to zoom
 
Check for correct installed position.

2832557 - click to zoom
 
Remove cotter pin and unscrew castle nut.
Press off ball joint with Special Tool 31 1 110.
Installation:
Clean ball journal and bores to remove grease and dirt.
Tightening torque*.
Lock nut with cotter pin.


Siehe auch * See Specifications of Gr. 31/32
2031014 - click to zoom
 
Unscrew control arm on mount (3).
4 = Washer (both sides)
Installation:
Replace self-locking nut.
Tightening torque* for a car in normal position*.


Siehe auch * See Specifications of Gr. 31/32
2831038 - click to zoom