Vehicles before change point in 1982
REPLACING ACCELERATOR CABLE SPRING
Remove valve body 24 30 000.
Take selector lever (1) off of transmission.
Disconnect accelerator cable.


Siehe auch 24 30 000
63024125 - click to zoom
 
Knock out key (2) in position 0.

63024126 - click to zoom
 
Press transmission to the right.
Pull out selector shaft far enough that spring (3)
can be removed.

63024127 - click to zoom
 
Installation: Connect short arm of spring on
accelerator cam (4).
Place long arm of spring in groove of case.
Install selector lever.
Preload spring with accelerator cam (4) by one
turn anticlockwise.
Connect accelerator cable and lock pawl with
key (2).

63024128 - click to zoom
 
Vehicles after change point in 1982
REPLACING SPRING FOR
ACCELERATOR CABLE
Remove valve body 24 30 000.
Detach selector lever (1) on transmission.
Disconnect accelerator cable.


Siehe auch 24 30 000
63024125 - click to zoom
 
Knock out pin (2) in N position.

63024126 - click to zoom
 
Pull out selector shaft far enough taht spring
(3) can be removed.

63024127 - click to zoom
 
Installation:
Connect short leg of spring on accelerator
cam (4).
Place long leg of spring in case groove.
Install selector lever.
Pre-load spring anticlockwise by one turn with
accelerator cam (4).
Connect accelerator cable and secure pawl with
pin (2).

63024128 - click to zoom