Vehicles after change point in 1982
REMOVING AND INSTALLING
CENTRIFUGAL GOVERNOR
Remove transmission extension 24 11 052.
Pull off parking lock gear with centrifugal
governor.


Siehe auch 24 11 052
2424025 - click to zoom
 
Version with Bearing Race (1):
Pull off parking lock gear with a Kukko puller.
Installation:
Heat bearing race (1) to about 80°C (175°F)
and slide on to output shaft.

2024026 - click to zoom
 
Replace seal (2).
Slide on parking lock gear with centrifugal
governor.

2024027 - click to zoom