Vehicles before change point in 1982
REMOVING AND INSTALLING CENTRIFUGAL GOVERNOR
Remove transmission cover 24 11 050.
Unscrew nut (1) and loosen stud (2) by about 3
turns.
Pull off governor.


Siehe auch 24 11 050
63024117 - click to zoom
 
Installation: Press piston rings togethe slightly
and slide governor on governor flange at same
time.
Unscrew stud to facilitate finding depression in
output shaft.
Secure governor with stud in depression of output
shaft and lock by counterpunching.

63024082 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
CENTRIFUGAL GOVERNOR
Remove transmission cover 24 11 050.
Unscrew nut (1) and stud (2) about 3 turns.
Pull off governor.


Siehe auch 24 11 050
63024117 - click to zoom
 
Installation:
Compress piston rings slightly and push
governor on to governor flange.
Important!
Punch mark (1) on output shaft must align
with opening (2) in governor flange.
Secure governor*.


Siehe auch * See Specifications
2024011 - click to zoom