Vehicles before change point in 1982 REMOVING AND INSTALLING OIL PAN Drain oil. Important: Never reuse drained oil. Installation: If oil smells burnt and is black, the transmission must be disassembled. If oil is silver gray, this concerns aluminum or iron abrasion. Park car on level surface. Correct oil level with transmission at operating temperature, selector lever at P and engine running at idle speed. Oil level of transmission at operating temperature (80°C/176°F) should be between both marks. Amount of oil betw. MIN and MAX marks: Flat oil pan = approx. 0.25 ltr. (0.55 pints) (black oil dipstick grip) Deep oil pan = approx. 0.40 ltr. (0.84 pints) (yellow oil dipstick grip) Never wipe off dipstick with a cloth losing lint. Oil level too high: serious foaming, oil lost by splashing out, temperature rises when driving fast and oil lost via vent. Oil level too low: rattling valves, engine slips in curves and general disturbances. Always use funnel 24 0 080 to pour in ATF. |  |
Disconnect oil filler tube at oil pan. Detach oil pan. |  |
Installation: Mount oil pan with brackets that short arms press down on oil pan. |  |
Important: Place magnet (1) in oil pan next to oil filter screen. Install gasket (2). Oil pan has two magnets from Transmission No. 416 558. |  |
Vehicles after change point in 1982 REMOVING AND INSTALLING OIL PAN Drain oil. Important! Never reuse drained oil. Installation: If oil smells burnt and is dark in color, transmission must be disassembled. Car parked on level surface. Correct oil level with selector lever at P, transmission at operating temperature and engine running at idle speed. Oil level of a transmission having operating temperature should be between both marks. Amount of oil betw. min. and max. marks = approx. 0.4 liters (0.7 pints). Oil Level Too High: Serious foaming, oil lost by splashing out, high temperature when driveng fast, oil lost through vent. Oil Level Too Low: Valves rattling, foaming, engine slipping, general functional disturbances. ATF must only be added through funnel 24 0 080. |  |
Unscrew oil filler tube on oil pan. Unscrew oil pan. |  |
Installation: Mount oil pan with brackets that short legs press on oil pan. Tightening torque*.  * See Specifications
| |
Important! Place magnets (1 and 2) in oil pan. Install gasket (3). |  |
