Vehicles after change point in 1982
REPLACING RADIAL OIL SEAL FOR OUTPUT FLANGE
Unscrew propeller shaft, see 23 00 022.
Lift out lockplate.
Apply Special Tool 23 1 200.
Hold output flange with Special Tool 23 0 020.
Unscrew collar nut with Special Tool 23 1 210.


Siehe auch 23 00 022
73023148 - click to zoom
 
If too difficult, pull off output flange with
Special Tool 33 1 150.

73023149 - click to zoom
 
Pull out radial oil seal with Special Tool
00 5 010.

2023114 - click to zoom
 
Lift out radial oil seal.
Drive in radial oil seal (1) flush with Special
Tool 23 1 370.
Installation:
Lubricate sealing lip with oil.

73023180 - click to zoom
 
Mount output flange.
Tightening torque*.
Install collar nut with Loctite No. 270.
Install lockplate.


Siehe auch * See Specifications
73023022 - click to zoom