Vehicles after change point in 1982
REMOVING AN INSTALLING GUIDE SLEEVE
FOR CLUTCH RELEASE
- Transmission Removed -
Lift out spring (1) and remove release lever (2)
with thrust bearing (3).

3023014 - click to zoom
 
Installation:
Pack lubricating groove N with Molykote
Longterm 2.
Coat guides F and bearings L with Molykote
Longterm 2.
Non-conformance could cause release bearing
to seize on guide sleeve.

31623025 - click to zoom
 
Unscrew guide sleeve.
Important!
Install guide sleeve and bolts with Loctite
No. 573.
Sealing surface and bolts must be thoroughly
cleaned adn dried of oil.
Tightening torque*.


Siehe auch * See Specifications
63023210 - click to zoom
 
Installation:
Adjust play to 0 ... 0.09 mm (0 to 0.0035´´).
Determine thickness of spacer.
Measure distance (A).

63023211 - click to zoom
 
Measure distance (B).
Example:
...A....3.0 mm (0.118´´)
.- B....2.6 mm (0.102´´)
__________________
.........0.4 mm (0.016´´) spacer thickness

63023212 - click to zoom