Vehicles after change point in 1982
REMOVING AND INSTALLING GUIDE SLEEVE
FOR CLUTCH RELEASE
- Transmission Removed -
Lift out spring (1) and remove release lever
(2) with thrust bearing (3).

63523075 - click to zoom
 
Installation:
Pack lubricating groove N with Molykote
Longterm 2.
Coat guides F and bearings L with Molykote
Longterm 2.
Non-conformance could cause release bearing
to seize on the guide sleeve.

63021029 - click to zoom
 
Unscrew guide sleeve.
Important!
Spacer (4).
Installation:
Install guide sleeve and bolts with a surface
sealing compound.
Sealing surface and bolts must be cleaned
thoroughly and dried of oil.
Tightening torque*.


Siehe auch * See Specifications
63523076 - click to zoom
 
Installation:
Adjust play to 0 ... 0.09 (0 to 0.0035´´).
Determine thickness of spacer.
Measure distance (A).

63523077 - click to zoom
 
Measure distance (B).
Example:
..A = 3.0 mm (0.118´´)
- B = 2.6 mm (0.102´´)
_________________
........0.4 mm (0.016´´) spacer thickness

63523078 - click to zoom