REMOVING AND INSTALLING CLUTCH SLAVE CYLINDER
Draw brake fluid out of tank until level drops to
filling line connection.

63021033 - click to zoom
 
Unscrew bolt (1).
Detach slave cylinder at transmission.
Remove slave cylinder.
Detach line (2).
Installation: Bleeder screw faces down.
Install front pressure rod with Molykote Longterm 2.
Bleed clutch 21 00 006.


Siehe auch 21 00 006
63021036 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
CLUTCH SLAVE CYLINDER
Unscrew cap on brake fluid tank.
Remove float container (2).
Draw off brake fluid in tank to lower level to connection for filling pipe.

2821003 - click to zoom
 
Unscrew slave cylinder on transmission.
Remove slave cylinder.
Installation:
Bleeder screw faces down.
Install front push rod with Molykote Longterm 2.
Bleed clutch - see 21 00 006.


Siehe auch 21 00 006
63323021 - click to zoom