REPLACING DISTRIBUTOR ROTOR
Remove distributor cap.
Pull off distributor rotor.
Resistance of suppressed distributor cap is
approx. 5 K-ohms.

63012079 - click to zoom
 
Vehicles after change point in 1982
Caution!
High power ignition system - dangerous high voltage.
Remove distributor cap - 12 11 091.


Siehe auch 12 11 091
63012135 - click to zoom
 
Loosen distributor rotor by pressing in both directions (radial) and pull off.
Installation:
Check seal (1), replacing if necessary.

73012024 - click to zoom
 
From model '84 on the distributor rotor is mounted with bolts.

63012164 - click to zoom
 
Checking:
Measure the resistance*.
Check casting compound (brittleness, burnt).


Siehe auch * See Specifications
63012136 - click to zoom