REPLACING DISTRIBUTOR CAP
Disconnect ignition cables.
Remove distributor cap and install a new one.
Installation: Watch order of ignition cables.
(1-5-3-6-2-4)

63012077 - click to zoom
 
For Cars with Stereo Suppression:
Disconnect ground wire and wire 1.
Remove distributor cap and pull suppressor
downward off of distributor cap.

63012078 - click to zoom
 
Vehicles after change point in 1982
Caution!
High power ignition system - dangerous high and low voltage.
Unscrew fan cowl and lift out of holders.
Unscrew fan - see 11 52 000.
Installation:
Place fan cowl in holders correctly.


Siehe auch 11 52 000
63017010 - click to zoom
 
Pull off cover.
Pull ignition lead end caps out of distributor cap.
Installation:
Check firing order - see figure.

63012159 - click to zoom
 
Unscrew distributor cap.
Note:
Cover radiator with rags - danger of injury on cooling fins.

63012160 - click to zoom
 
Lift fan cowl, push distributor cap forward all the way and pull out.

63012139 - click to zoom
 
Checking:
Check inside for hairline cracks and correct contact.

63012134 - click to zoom
 
Take off protective caps (1 and 2) for inspection of the outside.

73012023 - click to zoom