Vehicles after change point in 1982
REPLACING SPROCKET SET
- Timing Chain Removed -
Remove oil pan 11 13 000.
Remove sprocket (1) on oil pump.
Take off chain.
Lift out woodruff key (2).


Siehe auch 11 13 000
M8811080 - click to zoom
 
Pull off sprocket with Special Tool 11 2 000.
Installation:
Heat sprocket to max. 200° C (390° F) for installation.
Tighten oil pump chain, see 11 41 000.


Siehe auch 11 41 000
M8811081 - click to zoom
 
Apply Special Tools 11 3 040 and 11 3 062 on shaft of chain guide wheel.
Knock out shaft.

M8811155 - click to zoom
 
Installation:
Check needle sleeve in sprocket, replacing if necessary.
Forward direction and pressing in direction for needle sleeve.

M8811141 - click to zoom
 
Installation:
Replace O-ring (3).
Drive in shaft (with bore facing up) partially.
Push on guide wheel sprocket.
Drive in shaft against stop.

M8811170 - click to zoom