REPLACING CAMSHAFT Remove camshaft 11 31 000. Transfer sprocket flange. Guide plate (1), flange (2), lockplate (3) and nut (4). Identification of Camshafts: Up to 1980 models -272°/1 blue ring From 1980 models -260°/a green ring  11 31 000
|  |
||||||||||||||||
Installation: Check axial play¹) of camshaft and replace guide plate, if necessary. ¹) See Specifications
|  |
||||||||||||||||
Vehicles after change point in 1982 REPLACING CAMSHAFT - Camshaft Removed - Cars with Plugged Distributor Rotor: Unscrew bolt (5) and take off adapter (6). Installation: Make sure milled surfaces engage with each other when installing adapter. Place seal on bolt (5) and screw in bolt with Loctite No. 270**. Tightening torque*. * See Specifications ** Source: HWB
|  |
||||||||||||||||
Transfer flange of sprocket. Guide plate (1) Flange (2) Lockplate (3) Nut (4) Tightening torque*. * See Specifications
|  |
||||||||||||||||
Camshaft Identification.
|  |
||||||||||||||||
Installation: Check axial play* of camshaft, replacing guide plate if necessary. * See Specifications
|  |
