Hold flywheel with Special Tool 11 2 100. | |
Take off drive belts on alternator, power steering pump and, if applicable, compressor for air conditioner. Unscrew nut (1) with Special Tool 11 2 180. Installation: Tightening torque*. Tighten drive belts and check tightness with Special Tool 11 5 020. * See Specifications | |
Pull off vibration damper with hub. Installation: Check for correct installed position of key (2). Check seal, replacing if necessary. If hub is worn, install seal approx. 1 to 2 mm (0.039 to 0.079") deep. |