Vehicles after change point in 1982
REPLACING CYLINDER HEAD
GASKET
Remove cylinder head - see 11 12 100.
Clean sealing surfaces on cylinder head and crankcase thoroughly - using a gasket
remover** and a hard wood scraper.
Check levelness with a standard steel ruler, grinding the cylinder head sealing surfaces if
necessary - see 11 12 719.
Installation:
Only unse original cylinder head gaskets, which have openings to match the
cooling system.
Stamped Identification:

Type	Code	Bore Diameter
M6	3.5 M 88.3	93,4 mm (3.677")*

* See Specifiactions
11 12 100
11 12 719
** Source: HWB