INSTALLING RETRACTABLE ANTENNA
Remove and install instrument panel trim at
bottom left 51 45 180.
Loosen screws and remove front left wheel house
trim.


51 45 180

Drill a 20 mm (0.787´´) dia. hole in front of left
side wall.
Distance A = 70 mm (2.756´´).
Distance B = 10 mm (0.748´´).
Coat edges of hole with zinc paint.

Press plastic plug out of pre-punched hole.

Place rubber grommet, with bead facing passenger
compartment, on antenna wire.
Watch installed order of mounting parts:
1 ... 4 outside on side panel
5 ... 9 inside in wheel house
Let toothed ring (6) engage in openings of connector (7)
with its 2 shoulders.

Guide antenna into hole.
Install and tighten upper mounting parts.
Important: Connection for antenna wire faces
rear.

Mount bracket on threaded pins provided and
lower part of antenna.
Insert antenna wires in free opening, place rubber
grommet in hole and route wire to place of
radio installation.
If applicable, remove radio and connect antenna.
Install all removed parts.