REMOVING AND INSTALLING COMPRESSOR
Disconnect minus lead at battery.
Important: Lines are under pressure. Drain
refrigerant slowly. Observe safety regulations.
Detach refrigerant lines.
Insert sealing plugs into ends of refrigerant lines
without delay to prevent non-usability of drier.
Installation: Coat threads with refrigerant.
Use copper seals only once.
Discharge and charge air conditioner - 64 50 009.
Tighten to specified torque¹).


Siehe auch 64 50 009
Siehe auch ¹) See Specifications
63064063 - click to zoom
 
Loosen screws (1 ... 3).
Remove v-belt, disconnect electric wires and
remove conpressor.

63064064 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
AIR CONDITIONER COMPRESSOR
Discharge pressure in air conditioner with help of a valve core remover.
Installation:
Discharge, charge and check air conditioner for leaks after finishing
installation of compressor.

2864646 - click to zoom
 
Disconnect plug for pulley electromagnetic coupling.
Unscrew bolts (1 and 2).
Disconnect lines (3 and 4).
Insert plugs in open connections immediately.
Installation:
Replace gaskets.
Tightening torque*.


Siehe auch * See Specifications
2864657 - click to zoom
 
Detach splash guard.
Unscrew nuts (1 ... 3).
Unscrew bolts (4 ... 5).
Remove brace (6).
Remove compressor.

2864658 - click to zoom
 
Installation:
Check code number (1)*.
Tightening torque*.
Check drive belt tightness.


Siehe auch * See Specifications
2864659 - click to zoom