Vehicles after change point in 1982
REMOVING AND INSTALLING
EVAPORATOR
Remove evaporator housing 64 51 020.
Lift off seven clamps.
Unscrew bolt (1).
Cut off plastic rivet.


Siehe auch 64 51 020
2864042 - click to zoom
 
Remove upper housing section with blower.
Pull evaporator with expansion valve out of housing.
Unscrew couplings (1 and 2).
Disconnect hose (3).
Plug open line connections with plugs immediately.
Remove insulating compound and disconnect clamp (4).
Installation:
Secure coil (5) on pipe with clamp (4) and protect against ambient temperature
with insulating compound.

2864045 - click to zoom