REMOVING AND INSTALLING HEATER MOTOR
Disconnect minus lead at battery.
Loosen left and right screws (1 and 2).
Unscrew front screws and remove heater
blower cover.

63051061 - click to zoom
 
Open fasteners.
Remove housing upper sections and inlet
frames.

63064024 - click to zoom
 
Installation: Flat surface on outside of inlet
frame faces down.

63064025 - click to zoom
 
Lift out motor with blower wheels.
Disconnect wires.
Important: Never take blower wheels off of
motor shaft, since the assembly is balanced
together.
Only replace motor with blower wheels.
Installation: Turn motor until it engages
in lock.

63064026 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
HEATER MOTOR
Disconnect battery ground lead.
Unscrew bolts and take off cover.

63065112 - click to zoom
 
Push back retaining tabs (3) and remove blower shells (1 and 2).

2864627 - click to zoom
 
Installation:
Flat surfaces on inlet cowls face body.

2864626 - click to zoom
 
Pull off plug.
Disconnect retaining strap.
Remove motor with fan.

2064034 - click to zoom
 
Installation:
Positioning of blower motor is given by shape of housing.
Check code number*.
Check armature axial play*.
Important!
Do not take fan off of motor shaft or turn on shaft, since motor was balanced
with fan as an assembly.


Siehe auch * See Specifications
2864052 - click to zoom