Vehicles after change point in 1982
REMOVING ADN INSTALLING
OR REPLACING DRIVE
MOTOR FOR FRESH AIR FLAP
Remove glove box - 51 16 360.
Unscrew screws.
Pull off plug on light.
Remove trim panel.


Siehe auch 51 16 360
63051413 - click to zoom
 
Unscrew screws (1) and take off the impact switch.
Installation:
Don't forget spacer (3) between holder (2) and the cross memeber.

2864639 - click to zoom
 
Lift out plastic clamp and remove air duct.

2864821 - click to zoom
 
Run drive motor to the shown position (fresh air flap open halfways).
Disconnect plug.
Remove relay with socket.
Disconnect linkage on motor.

2864822 - click to zoom
 
Unscrew screws.

2864823 - click to zoom
 
Installation:
Run up lever on drive motor against the stop (fresh air flap closed).
Close air flap (lever moved up).
Now attach linkage (1) to be without play and tension.
Adjust linkage if necessary.

2864824 - click to zoom