REMOVING AND INSTALLING SPEEDOMETER
Remove and install instrument carrier 62 21 000.
Loosen screws (1 ... 6) and remove bottom
plate.


Siehe auch 62 21 000
63062011 - click to zoom
 
Loosen screws (1 and 2) and remove speedometer.
Installation: Make sure that speedometer snaps in
arrest (3).

63062014 - click to zoom
 
When replacing speedometer, note constant W¹).


Siehe auch ¹) See Specifications
63062015 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
SPEEDOMETER
Remove and install instrument cluster up to the step of removing the
speedometer - see 62 11 000.
Installation:
Check speed (K)*.


Siehe auch * See Specifications
Siehe auch 62 11 000
2862014 - click to zoom
 
Checking Speedometer:
a)
Pull off plug for speedometer on final drive.
Connect BMW service test unit (multimeter 13 test step) on plug for speedometer
to operating instructions.
Connections:
Black clip on brown wire.
Blue clip on brown/red wire.
Turn on ignition.
Put in frequency* on BMW service test unit.
b)
Instrument cluster removed.
See simulator for checking instrument clusters - page 62-81.


Siehe auch * See Specifications