Vehicles after change point in 1982
REMOVING AND INSTALLING
OR REPLACING DRIVE AND
GEARBOX FOR OUTER AND
INNER SEAT FORWARD /
BACKWARD AND UP / DOWN
CONTROL
- Front Seat Removed -
Remove control unit - see 61 31 099.
Unscrew bolts, pull off connecting shafts and remove drive as well as, if applicable,
potentiometer.
If applicable, remove control unit (memory) with bracket.


Siehe auch 61 31 099
73052054 - click to zoom
 
Unscrew screws.
Take off gearbox.

73052055 - click to zoom
 
Installation:
Distance (A) must be identical for both rails.
Pins (1) are located in holders.

73052056 - click to zoom
 
Unscrew screws and nuts.
Take off gearbox assembly.
Installation:
Pins (1) are located in holders.

73052057 - click to zoom
 
Installation:
Use spacers (1) on both studs.

73052058 - click to zoom
 
Removing Connecting Shafts:
Pull off circlip.

73052059 - click to zoom
 
Unscrew screws.
Lift cover off of gearbox slightly and pull out connecting shaft (1).

73052060 - click to zoom
 
Loosen screws.
Lift cover and pull out connecting shaft (2).

73052062 - click to zoom
 
Loosen screws.
Lift cover and pull out connecting shaft (3).

73052063 - click to zoom
 
Remove circlip.

73052064 - click to zoom
 
Loosen screws.
Lift cover and pull out connecting shaft (4).

73052065 - click to zoom