Vehicles after change point in 1982
REMOVING AND INSTALLING
PEDAL BASE ASSEMBLY
Remove complete steering column - see 32 31 090.
Disconnect accelerator pedal return spring (2) and brake pedal return spring (1).


Siehe auch 32 31 090
63035068 - click to zoom
 
Unscrew nut (6).
Pull out eccentric (7).
Installation:
Check installed position of over-center helper spring.
Adjust pedal height to distance (B)* with eccentric (7).
Tightening torque*.


Siehe auch * See Specifications
63035052 - click to zoom
 
Unscrew bolts.

2035007 - click to zoom
 
Press off clamp (1).
Pull out shaft (2).

63035069 - click to zoom
 
Installation:
Adjust brake pedal height (A)* on brake linkage (1) that travel is limited in the brake
master cylinder.


Siehe auch * See Specifications
2035013 - click to zoom
 
Installation:
Adjust stop light switch.
B = 5 to 6 mm (0.197 to 0.236").

3035018 - click to zoom
 
Unscrew nuts.

63035070 - click to zoom
 
Unscrew bolts.
Remove base.

63035071 - click to zoom