Vehicles before change point in 1982
REMOVING AND INSTALLING STABILIZER
Detach stabilizer at trailing arm.
Detach stabilizer at rear axle carrier.
Installation: Check rubber rings and rubber
mount (1) for wear, replacing if necessary.
Slotted side of rubber mount (1) faces forward.
Distance A = 142 ± 2 mm (5.590 ± 0.080´´).
Torque for nut (2): 22 to 24 Nm (16 to 17 ft.lbs.).
Tighten nut (3) to distance A.
Torque for castle nut: 22 to 24 Nm (16 to 17 ft.lbs.).