Vehicles before change point in 1982
REPLACING STEERING SPINDLE
Remove and install steering column 32 31 090.
Remove collar (1).
Installation: Position collar (1) that snap ring
(2) is in recess of collar.


Siehe auch 32 31 090
63032167 - click to zoom
 
Remove snap ring (2), washer (3), spring (4)
and ring (5).
Installation: Stem of ring (5) faces steering
spindle bearing.
Install snap ring (2) with Special Tool 32 3 050.

63032168 - click to zoom
 
Unlock steering wheel lock with ignition key
and pull out steering spindle.

63032169 - click to zoom
 
Pull off collar ring (1) and remove snap ring (2).
Installing: Install collar (1) that snap ring (2)
is in recess of collar.

63032170 - click to zoom
 
Installation: Don´t disassemble new steering
spindle.
If steering spindle was disasssembled or nut loosened,
tighten nut enough that the specified pushing
torque¹) is reached.


Siehe auch ¹) See Specifications
63032171 - click to zoom