Vehicles before change point in 1982
REPLACING TAPER ROLLER BEARING AND SHAFT SEAL
- Wheel Hub Removed -
Remove shaft seal.
Remove taper roller bearing.
Pull out bearing outer races with Special Tool
00 8 550
OR

knock out bearing outer races through openings
in wheel hub.

Installed Order:
1 = Wheel bearing outer race
2 = Wheel bearing inner race
3 = Wheel bearing outer race
4 = Wheel bearing inner race
5 = Shaft seal

Press in bearing outer races with Special Tools
31 2 061 (outer) and
31 2 062 (inner).
Replace grease packing¹) in wheel hub.
Always replace both bearings.


¹) See Specifications

Lubricate sealing lips of shaft seal with grease.
Install shaft seal with Special Tool 31 2 040.