Vehicles after change point in 1982
REPLACING BEARINGS
(WHEEL HUB) FOR FRONT
WHEEL
Remove front wheel - see 36 10 300.
Unscrew bolts (1).
Installation:
Tightening torque*.


Siehe auch 36 10 300
Siehe auch * See Specifications of Gr. 34
2031046 - click to zoom
 
Pull off brake caliper and suspend from body on a piece of wire.
Wires and brake line remain connected.
Unscrew bolt (2) with Special Tool 34 1 020.
Take off brake disc.

2031047 - click to zoom
 
Press off cap.
Punch locking edge of nut out of groove.
Unscrew nut with Special Tool 31 2 080.

2031021 - click to zoom
 
Pull off bearing assembly (2) and cover (3) with Special Tool 31 2 100.

2031022 - click to zoom
 
Wheel Bearings
1 = Stub axle
2 = Bearing assembly
3 = Cover
4 = Washer
5 = Nut
6 = Cap
Important!
Bearing assembly is lubricated for its entire service life and cannot be
disassembled.

2831003 - click to zoom
 
Install cover (3) on stub axle.
Pull on bearing assembly (2) and cover (3) with Special Tool 31 2 110.

2031024 - click to zoom
 
Install washer (4) and new nut (5).
Tighten nut to correct torque* and lock (punch).
Always replace grease cap.
Fit new grease cap with sealing compound, HWB No. 81 22 8 407 420.


Siehe auch * See Specifications of Gr. 31
2031025 - click to zoom