Vehicles after change point in 1982
REPLACING WIRE HARNESS
FOR AUTOMATIC TRANSMISSION
Remove valve body 24 30 002.
Pull off wire harness plugs on solenoids (1 ... 4),
pressure regulator (5) and pulse transmitter
(6).
Lift wire harness out of holders.
Installation:
Check colors of wires.
Solenoid (1) - gray/violet
Solenoid (2) - green/violet
Solenoid (3) - red/violet
Solenoid (4) - orange/violet
Pressure regulator (5) - blue/violet
Pulse transmitter (6) - brown/brown
Push on plugs against stop and check for tight
fit.

Route wire harness and clamp in holders
(7 ... 10).

Turn valve body around.
Route wire harness and clamp in holders
(11 ... 14).