REPLACING RADIAL OIL SEAL FOR INPUT SHAFT
- Transmission Removed -
Detach guide flange.
Remove radial oil seal.

73023071 - click to zoom
 
Knock in radial oil seal against stop with Special
Tools 23 1 180 and 00 5 500.
Open end faces transmission.
Lubricate sealing lip with oil.

73023072 - click to zoom
 
Vehicles after change point in 1982
REPLACING RADIAL OIL SEAL FOR INPUT SHAFT
- Transmission Removed -
Remove guide sleeve 23 11 623.
Unscrew guide tube.
Installation:
Install guide tube and bolts with Loctite No.
573.
Sealing surface and bolts must be thoroughly
cleaned and dried of oil.
Tightening torque*.


Siehe auch 23 11 623
Siehe auch * See Specifications
63023219 - click to zoom
 
Important!
Collar on inside surface of flange.
Drive out radial oil seal in direction of guede
tube with Special Tool 24 1 040.

63023220 - click to zoom
 
Drive in radial oil seal with Special Tools
23 1 220 and 00 5 500.
Lubricate sealing lips of radial oil seal with oil.

63023221 - click to zoom
 
Transmission 260/6:
Lift out radial oil seal.

63523027 - click to zoom
 
Drive in radial oil seal against stop with Special
Tools 23 1 180 and 00 5 500.
Open end faces up.
Lubricate sealing lip with oil.

63523028 - click to zoom