CHECKING DRIVE PLATE FOR LATERAL RUNOUT
- Drive Plate Removed -
Clamp Special Tool 21 2 110 in a vise.
Mount Special Tools 00 2 510 and 00 2 500.

Clamp drive plate on special tool and clean
liner with emery cloth.

Apply dial gage about 3 mm (0.120´´) from
outer edge.
Turn drive plate and read lateral runout¹).


¹) See Specifications

Straighten drive plate by applying plastic hammer
at take-up points for the special tool.
Repeat test.

Vehicles after change point in 1982
CHECKING LATERAL RUNOUT
FOR DRIVE PLATE
- DRIVE PLATE REMOVED -
Clamp Special Tool 21 2 110 in a vise.
Mount Special Tool 00 2 510 and 00 2 500.

Clamp drive plate on fixture and clean liners with emery cloth.

Apply dial gauge about 3 mm (0.118") from outer edge.
Turn drive plate and read lateral runout*.


* See Specifications

Straighten drive plate with a plastic hammer applied on take-up points fixture.
Repeat test.