Vehicles after change point in 1982
REMOVING AND INSTALLING
OR REPLACING FUEL INTAKE
(FUEL LEVEL TRANSMITTER)
If fuel tank is full, drain fuel partially with a scavenging pump*, or if necessary
remove the drain plug.
Caution!
Comply with safety regulations.


Siehe auch * Source: HWB
3016003 - click to zoom
 
Remove trunk mat.
Unscrew cover (2).
Pull off plug (1).

63316030 - click to zoom
 
Unscrew nuts and pull out fuel level transmitter.
Installation:
Replace gasket (1).

2816103 - click to zoom
 
Remove transport guard (8) if replacing and installing a new fuel level
transmitter.

2816108 - click to zoom
 
Loosen hose clamps and pull off line.
Unscrew bolts (1).
Installation:
Use new hose clamps.

63316026 - click to zoom
 
Pull out fuel intake.
Installation:
Check gasket (9), replacing if necessary.

2816110 - click to zoom
 
Installation:
Clean filter (10) if necessary.

2816111 - click to zoom