Vehicles after change point in 1982
REMOVING AND INSTALLING ONE FUEL INJECTOR
Unscrew bolts on the injection tube.

Disconnect hose (5).
Pull off plugs on cold start valve (1), throttle
bypass valve (2) and throttle valve switch (3).
Pull off plug plate (4) on the fuel injectors.

Push up injection tube (1) until the fuel
injectors have cleared the gides of the throttle
valve necks.
Lift out retainer (2) and take off fuel
injector.

Installation:
Check O-rings (1), replacing if necessary.
Check code number (2)*.
FD = Manufacturing date
Check position of plastic washer (3).
Check color* of plug receptacle (5) or
injector guard (4).
Only coat O-rings with vaseline or SAE 90
gear lube for installation.


* See Specifications